NNREPAIR  Advance Technology Repair Solutions

RU

TR

EN

NP80™

Light Cure Repair Material for surface defects on very visible areas of ceramic/acrylics

Repair Elements

Application Video

· Industry now has a real solution for repairs of small defects on very visible areas on ceramics and acrylics

· Extreme polishing properties

· No yellowing or fade with time

· High gloss finish as shiny as ceramic surface

· The repair area will not get dirty with time

· 80% nano filler technology (may change with different colors)

· Cures with blue light

· Available in almost every color, Custom Color Matching is available

· 4,5 grams syringe

· Also works great on other hard surfaces.

Sandpaper and Levelling tape

Repairs

· Sinks

· Washbasins

· Bathtubs

· Shower Trays

· Pedestals

· Tanks

· Bidets...

 

Order Data

Light Cure Repair Starter Kit ($200,00) 

Light Unit + 1 syringes of each (NP80™, NP80™-FLOW, NNREPAIR-GLAZE - 2GR, NNREPAIR-GLAZE - 3GR) + Applicator Tool + Accessories. Click here to buy online

 

Refill Syringe ($16,00) Click here to buy online     

Application Steps

BEFORE GRINDING

AFTER GRINDING

BEFORE SANDING

AFTER SANDING

Light Unit

(OPTIMUM RPM = 3000-5000)

Under Construction

Under Construction

CURE WITH LAYERS IF THE DEFECT IS DEEPER THAN 2 mm

home

Graphene sheet model , 3d illustration Stock Photo - 10529473

PHOTO

STEP

TIP

PRODUCTS TO USE

 

1

Defect on a ceramic/acrylic/porcelain surface

NP80™ light cure repair

material repairs small defects on very visible areas of ceramic, acrylic, porcelain and other hard surfaces.

NP80™ 4,5 Grams Syringe

(Click here to buy online)

 

2

Grinding the defect

Grind the defect with a grinder (5000-7000 rpm is optimum). This will create porous surface which will lead extra adhesion of the repair material to the rest of the surface. 

 

DREMEL HAND TOOL CORDLESS

(Click here to buy online)

 

DREMEL HAND TOOL CORDED

(Click here to buy online)

 

DREMEL HAND TOOL CHUCK 4486

(Click here to buy online)

 

DREMEL 84922 GRINDING STONE

(Click here to buy online)

3

Cleaning the defected area.

After grinding, clean the defect with a piece of cloth or pressurized air. In order to have a better finish do not allow any dust or particles in or around the defected area.  

Use microfiber cloth, paper towel

or pressurized air.

4

Filling the defect with  NP80™

When you fill the defect with the material do not let air bubbles form. If they appear, the finished repair will not look good. If you observe air bubbles or any particles (like dust) in the repair material remove material with a paper towel. Clean the area and fill it again. Do not overfill. It will lead extra sanding after curing.

 

APPLICATOR TOOL

(Click here to buy online)

 

 

5

Cover the repair material with "LEVELLING TAPE"

Before covering the repair material with levelling tape make sure that levelling tape is clean. When you cover the repair material with levelling tape you can observe any particles (such as dust, etc.) stuck in the repair material. If so remove the levelling tape and the material and go back to the step 4.  

LEVELLING TAPE

(Click here to buy online)

6

Pressing repair material into the defect.

After covering material with levelling tape with the help of applicator tool press on the levelling tape. This will help repair material to penetrate every part of the defect. Make sure that you filled the defect completely. This is the last step before curing so if you observe any particles like dust or any air bubbles remove tape and material and go back to step 4.

 

 

APPLICATOR TOOL

(Click here to buy online)

 

7

Curing with Light

Repair material is a light cure material. It cures (becomes solid) with visible blue light. Cure the repair material (levelling tape is still on it) with blue light for 40 seconds. If the defect is deeper than 2 mm cure with layers as shown on the picture.

PROFESSIONAL LIGHT UNIT

(Click here to buy online)

 

 

 

8

Sanding

After curing the material with blue light, touch and push on the levelling tape before removing it. Make sure that the material is fully cured (became solid). Then gently remove the levelling tape. If you observe any uncured repair material cure it more with blue light. Remove the excess repair material gently by sanding with SANDPAPER - 220 GRIT. When removing the excess repair material with 220 grit sandpaper micro scracthes may occur on the repair area. In order to remove these scracthes from the surface sand it with 2000 GRIT sandpaper.

 

SANDPAPER (220 GRIT GARNET)

(Click here to buy online)

 

WET SANDPAPER (2000 GRIT)

(Click here to buy online)

 

9

Polishing

After sanding and buffing with different grit size sandpapers now it is time for polishing. The best way is to use polishing wheel. Polishing wheel works best when the rpm is about 3000. Use gently and polish the repair area.

 

POLISHING WHEELS AND ITS MANDREL

(Click here to buy online)

 

DREMEL HAND TOOL CHUCK 4486

(Click here to buy online)

 

DREMEL HAND TOOL CORDLESS

(Click here to buy online)

 

DREMEL HAND TOOL CORDED

(Click here to buy online)

 

 

viagra Levitra Soft Tabs Kamagra Fizzy Tabs Acquistare Viagra Soft Tabs Viagra Generic Test Pacchetti Originale Acquistare Levitra Strips Il brevetto Viagra Cialis e Super Kamagra Acquistare Cialis Strips Viagra Pastiglie Kamagra 100 Cialis online Levitra Generico Test pacchetti Propecia generico Acquistare Cialis Soft Tabs Viagra e generici
Acquisto Kamagra Flavored Acheter Propecia Cialis kaufen Cialis Super Active kaufen Comprare Levitra Professional cialis kaufen Propecia Cialis Soft Acheter Cialis strips Acquisto Kamagra Gold Levitra Acheter Viagra soft tabs Viagra Super Active Viagra Gold - Vigour levitra generika Viagra Soft Viagra Soft