NNREPAIR  Advance Technology Repair Solutions

RU

TR

EN

NNREPAIRPLUS Dual Cure Repair (DCR™)

Dual Cure Repair Material for Body and Surface Cracks on Ceramics/Acrylics

Repair Elements

Application Video

· Superior Formula

· Cures with blue light and catalyst

· Available in almost every color, Custom Color Matching is available

· Better long term color stability than regular chemical cure repair materials 

· Cures in minutes even for deep and big cracks

· No limit for depth of cure

· Minimum yellowing with time (Db<2.0 after 7 years)

· Net volume : 50 ml

· Repairs large cracks even below water line

· Polishable material

· Also works great on other hard surfaces.

Application Dispenser

Static Mixers

Repairs

· Sinks

· Washbasins

· Bathtubs

· Shower Trays

· Pedestals

· Tanks

· Bidets...

 

Order Data

Starter Kit ($300,00) 

Light Unit + Application dispenser + 100 Static Mixers + 1 Cartridge of DCR Material + Accessories. Click here to buy online

 

Refill Cartridge ($50,00)

Including 10 Static Mixers Click here to buy online    

Application Steps

BEFORE GRINDING

AFTER GRINDING

BEFORE SANDING

AFTER SANDING

Light Unit

(OPTIMUM RPM = 3000-5000)

home

Graphene sheet model , 3d illustration Stock Photo - 10529473

Under Construction

PHOTO

STEP

TIP

PRODUCTS TO USE

 

1

Defect on a ceramic/acrylic/porcelain surface

NNREPAIRPLUS Dual Cure Repair (DCR™)  material repairs large defects on ceramic, acrylic, porcelain and other hard surfaces.

 

NNREPAIRPLUS DCR CARTRIDGE

(Click here to buy online)

 

2

Grinding the defect

Grind the defect with a grinder (5000-7000 rpm is optimum). This will create porous surface which will lead extra adhesion of the repair material to the rest of the surface. 

 

DREMEL HAND TOOL CORDLESS

(Click here to buy online)

 

DREMEL HAND TOOL CORDED

(Click here to buy online)

 

DREMEL HAND TOOL CHUCK 4486

(Click here to buy online)

 

DREMEL 84922 GRINDING STONE

(Click here to buy online)

 

3

Cleaning the defected area.

After grinding clean the defect with a piece of cloth or pressurized air. In order to have a better finish do not allow any dust or particles in or around the defected area.  If you repair an acrylic or a fiberglass surface (which is not resistant to sandpaper), use masking tape. 

Use microfiber cloth, paper towel

or pressurized air.

 

4

Preparation of the material

Open the lid of the cartridge and place the static mixer. Then place the cartridge in the dispenser. Please note that there are two types of static mixers, Blue and yellow. Yellow is for large defects, Blue is for small defects.

 

APPLICATION DISPENSER

(Click here to buy online)

 

BLUE MIXING TIP

(Click here to buy online)

 

YELLOW MIXING TIP

(Click here to buy online)

 

5

Filling the defect

Fill the defect with the material. Do not overfill . Please note that when you first use the cartridge (or reuse it after some time) , Pour some material on a piece of cartoon or paper to be sure about proper mixing. Then fill the defect with the material. 

 

 

 

6

Place the levelling tape

Once you fill the defect with the material, Place the levelling tape on top of the material and make it flat using the stick. Please note that if the defect is larger than the levelling tape, you can use more than one levelling tape side by side.

 

LEVELLING TAPE

(Click here to buy online)

 

STICK

(Click here to buy online)

 

7

Curing with Light

DCR™ material cures with blue light and catalyst. For quick curing of the top layer of the material, use blue light. For every square of cm, use at least 40-60 seeconds of blue light. Please note that Blue light cures only the 1 mm from the top, rest cures chemically in 10-15 minutes.  

 

PROFESSIONAL LIGHT UNIT

(Click here to buy online)

 

 

 

8

Sanding

After 10-15 minutes, Remove the levelling tape, Sand the material first with 220 grit and then with 2000 grit. It is important to use masking tape for acrylic and fiberglass surfaces not to scracth the surface.

 

SANDPAPER (220 GRIT GARNET)

(Click here to buy online)

 

WET SANDPAPER (2000 GRIT)

(Click here to buy online)

 

9

Polishing

Polishing can be done through polishing wheel or through polishing paste.

 

POLISHING WHEELS AND ITS MANDREL

(Click here to buy online)

 

DREMEL HAND TOOL CHUCK 4486

(Click here to buy online)

 

DREMEL HAND TOOL CORDLESS

(Click here to buy online)

 

DREMEL HAND TOOL CORDED

(Click here to buy online)

 

POLSIHING PASTE

(Click here to buy online )

viagra Levitra Soft Tabs Kamagra Fizzy Tabs Acquistare Viagra Soft Tabs Viagra Generic Test Pacchetti Originale Acquistare Levitra Strips Il brevetto Viagra Cialis e Super Kamagra Acquistare Cialis Strips Viagra Pastiglie Kamagra 100 Cialis online Levitra Generico Test pacchetti Propecia generico Acquistare Cialis Soft Tabs Viagra e generici
Acquisto Kamagra Flavored Acheter Propecia Cialis kaufen Cialis Super Active kaufen Comprare Levitra Professional cialis kaufen Propecia Cialis Soft Acheter Cialis strips Acquisto Kamagra Gold Levitra Acheter Viagra soft tabs Viagra Super Active Viagra Gold - Vigour levitra generika Viagra Soft Viagra Soft